Teknicolour Epoxy Floor Paint Epoxy

Due to the spiralling number of accidents caused both
in wet or oily conditions underfoot, on stairs, walkways, ramps, etc... Teknicolour Epoxy has been developed to render all treated surfaces nonslip.

Teknicolour Epoxy creates a nonslip surface for either
pedestrian or rubber wheeled traffic and may be
applied to most surfaces including concrete, wood
steel, aluminium as well as tiled surfaces.

Teknicolour Epoxy is a two pack resin based system that incorporates the correct amount of curing agents
therefore reducing the incorrect mixing on site.

Ensure that the surface to be treated is oil and
grease free, by scrubbing using future's Blue Magic.
Adhesion to smooth concrete will be improved by
using future seal which should be applied first and
allowed to dry. after Teknicolour Epoxy has been stirred, simply apply to surface with a soft broom or roller at approximately 30-40 sq ft. per ltr. depending on the pourosity of the surface. wait until the first cote is dry before adding any more.

Apply only thin coats!

Teknicolour Epoxy is resistant to water, acids, alkalis, detergents mineral oils, cutting oils, vegetable oils, diesel, petrol, anti-freeze and most solvents.