Teknicolour Gripper Anti Slip Floor Paint

DUE TO THE SPIRALLING NUMBER OF ACCIDENTS CAUSED BOTH IN WET OR OILY CONDITIONS UNDERFOOT, ON STAIRS, WALKWAYS, RAMPS, ETC... TEKNICOLOUR HAS BEEN DEVELOPED TO RENDER
ALL TREATED SURFACES NONSLIP.

TEKNICOLOUR gripper CREATES A NONSLIP SURFACE FOR EITHER PEDESTRIAN OR RUBBER WHEELED TRAFFIC AND MAY BE APPLIED TO MOST SURFACES INCLUDING CONCRETE, WOOD STEEL, ALUMINIUM AS WELL AS TILED SURFACES.

TEKNICOLOUR IS A ONE PACK RESIN BASED SYSTEM THAT INCORPORATES THE CORRECT AMOUNT OF CURING AGENTS THEREFORE REDUCING THE INCORRECT MIXING ON SITE.

ENSURE THAT THE SURFACE TO BE TREATED IS OIL AND GREASE FREE, BY SCRUBBING USING FUTURE'S BLUE MAGIC. ADHESION TO SMOOTH CONCRETE WILL BE IMPROVED BY USING FUTURE SEAL WHICH SHOULD BE APPLIED FIRST AND ALLOWED TO DRY. AFTER TEKNICOLOUR HAS BEEN STIRRED,
SIMPLY APPLY TO SURFACE WITHA SOFT BROOM AT
APPROXIMATELY 50-60 SQ FT. PER LTR. DEPENDING ON THE POUROSITY OF THE SURFACE. WAIT UNTIL THE FIRST COTE IS DRY BEFORE ADDING ANY MORE. TEKNICOLOUR IS RESISTANT TO ACIDS, ALKALIS, DETERGENTS AND SOME SOLVENTS.

APPLY ONLY THIN COATS!